Search

Home > Knowledge > Content
LED display cleaning method
Apr 09, 2018


The LED display needs to be cleaned both before and after installation. This is a very important aspect, which can prevent the LED display from appearing unclear, mosaic phenomenon, and color cast when it is black. After a certain time of operation, the display screen will have accumulations of debris such as dust, and the periodical cleaning and maintenance of the LED display screen can prolong the service life of the LED display screen and improve the quality of use of the LED display screen. Therefore, the cleaning of LED display screens is particularly important whether it is before loading the screen or after loading the screen.


1. Cleaning of LED module semi-finished products


When the LED module is still only a semi-finished product without a kit, it needs to be cleaned with a special washer, and the LED module is dipped in water and then brushed with a brush to accelerate the dissolution of the rosin and the detachment of the flux. Remove dust and impurities.


2, LED electronic display after installation cleaning


LED electronic display installation shows that there will be accumulation of dust and impurities after a period of time. In order not to affect the display effect of the display screen, the surface of the LED display screen needs to be cleaned with detergents such as clean water or clean water and detergent. The surface can be cleaned, and special care must be taken when cleaning. Do not get the cleaned water on the back of the LED module.


Related Industry Knowledge

Copyright © Nationtronics Group Co.,Ltd All Rights Reserved.