Search

You Are Here:Home > Product > Video Processor

LVP608 Video Processor

Overview of LVP608 4K2K LED Video Processor Features Specifications ●Inputs: 1x Video; 2x VGA; 1x DVI; 1x SDI; 1x DP1.2; 1x HDMI1.4; ●Outputs: 8 X DVI; Single DVI output resolution:1920*1080_60Hz; ●Pixel-by-pixel synchronous mosaic; HDMI and DP support 4K2K_30Hz inputs: a 4K input will be......

Send InquiryChat Now

Overview of LVP608 4K2K LED Video Processor

 

blob.png 

Features

Specifications

●Inputs: 1x Video; 2x VGA; 1x DVI; 1x SDI; 1x DP1.2; 1x HDMI1.4;

●Outputs: 8 X DVI; Single DVI output resolution:1920*1080_60Hz;

●Pixel-by-pixel synchronous mosaic; HDMI and DP support 4K2K_30Hz inputs: a 4K input will be processed by the internal multiplier and split in 4 outputs and resolution of each output is 1920x1080_60; No need of complicated software settings;

●Zoom mosaic: image can be zoomed by 2 times; HDMI and DP support 4K2K_30Hz inputs: a 4K input will be processed by the internal multiplier and split in 8 outputs and resolution of each output is 1920x1080_60; No need of complicated software settings;

●A roaming window can be opened on a 4K2K ultra HD background picture;

●State-of-the-art motion adaptive de-interlacing technology: to eliminate trailing or jaggies of motion pictures;

●Adopting crosspoint high bandwidth and high date rate transmission technology

●Transition effects between any signals: cut or fade;

●Text or image overlay; AIAO(Any In Any Out) allows for cropping and scaling any size input to any size output;

●Convenient panel / RS232 / USB / LAN control and setup


Inputs

Number/Type

1×Video

2×VGA (RGBHV)

1×DVI (VESA)

1×HDMI (CEA-861)

1×DP (VESA)

1×SDI (SDI/HD-SDI/3G-SDI)

Video System

PAL/NTSC

Composite Video Amplitude/Impendance

1V (p_p) / 75Ω

VGA Format

PC (VESA)

≤1920×1200_60Hz

VGA Amplitude/

R, G, B = 0.7 V (p_p) / 75Ω

DVI Format

PC (VESA)

≤1920×1200_60Hz

HDMI Format

PC (VESA)

≤3840×2160_30Hz

HDMI1.4 (CEA-861)

DP Format

Display Port 1.2 (VESA)

≤3840×2160_30Hz

SDI Format

SMPTE 259M

480i_60Hz

SMPTE 292M

576i_50Hz

 

720p, 1080i, 1080p

Input Connectors

Video: 4-Pin VGA

VGA: 15-pin D_Sub (Female)

DVI: 24+1 DVI_D

SDI: BNC/ 75Ω

HDMI: HDMI A Type

DP: Display Port

Outputs

 

Number/Type

8×DVI

Preview Output

1×DVI (can be on any output card)

DVI Format

1920×1080_60Hz

Output Resolution

DVI: 24+1 DVI_D

Others

 

Control Port

RS232/USB/LAN

Input Voltage

100-240VAC 50/60Hz

Maximum Power Consumption

≤60W

Environment Temperature

0-45 ℃

Environment Humidity

15-85%

Dimension

483 (L) x 300 (W) x 89 (H) mm

Weight

G.W.: 7.7Kg, N.W.:5.4Kg


LVP608

4K2K LED Video Processor

User Manual

blob.pngblob.png


Chapter1. Safety precautions 

! Danger

There is high voltage in the processor, to prevent any unexpected hazard, unless you are a maintenance personnel, please do not open the cover of the device.

 

! Warning

1. This device shall not encounter water sprinkle or splash, please do not place anything containing water on this device.

2. To prevent fire, keep this device far from any fire source.

3. If this device gives out any strange noise, smoke or smell, please immediately unplug the power cord from receptacle, and contact local dealer.

4. Please do not plug or unplug DVI signal cable if the device is powered on.

 

! Caution 

1. Please thoroughly read this manual before using this device, and keep it well for future reference.

2. In the event of lighting or when you are not going to use the device for a long time, please pull the power plug out of receptacle.

3. Nobody other than professional technicians can operate the device, unless they have been appropriately trained or under guidance of technicians.

4. To prevent equipment damage or electric shock, please don’t fill in anything in the vent of the device.

5. Do not place the device near any water source or anywhere damp.

6. Do not place the device near any radiator or anywhere under high temperature.

7. To prevent rupture or damage of power cords, please handle and keep them properly.

8. Please immediately unplug power cord and have the device repaired, when

1) Liquid splashes to the device.

2) The device is dropped down or cabinet is damaged.

3) Obvious malpractice is found or performance degrades.

  

Chapter2. Items list

Please unpack the product with care, and then check whether all the following items are included in the package. If anything is found missing, please contact the dealer.

 

Standard accessories

The accessories supplied with this product may differ from the following pictures, but they are applicable for the regions where you live.

blob.pngblob.png


Chapter3. Hardware connection

3-1 System framework introduction

Due to the plug-in design of input and output cards, the LVP608 configuration will depend on customer-specific requirements.

Types of cards

Number

Function

Full HD Video input card

x1

Integrate multiple video signals of different types and formats

Ultra HD Video input card

x1

Integrate 4K2K video signal

Output card

Maximum x2(DVI Ports x8)

Output processed signals to each display unit

 

Notice: when 2 output cards are pugged in, one of them can be used for preview output.

3-2  Rear view

blob.png 

3-3 Port description

1) Input ports

LVP608 maximally supports 2 PCS of input cards, one full HD video input card(In-B) and one Ultra HD video input card(In-D).

 

Full HD video input card supports 4 input signals. The port description is as follows:

Port

Description

VGA/Video

1* VGA(PC analog signal)

1*Composite(PAL/NTSC,VGA—VGA-RCA  adapter needed)

DVI/In-B

1 X DVI (HDMI1.3 compatible)

SDI

1x SDI/HD-SDI/3G-SDI digital signal input.

     

Ultra HD Video input card supports 3 external inputs and 1 internal DVI input.The port description is as follows:

Port

Description

VGA

1X PC analog signal input

DP

1X DP digital signal input(DP1.2) 

HDMI

1X High-definition Multimedia signal input(HDMI1.4)

DVI

1X DVI digital signal input, which is from the output of Full HD Video Input Card In-B

 

2) Output port

LVP608 maximally supports 2 PCS of output cards (Out-K, Out-L) and each card supports 4 DVI outputs. The port description is as follows:

Port

Description

Out1-Out4

4 DVI outputs for connecting to sending cards or monitors

 

3) Communication ports

Port

Description

LAN

LAN TCP/IP network control

USB

USB communication port

RS232  IN

Serial communication port, RS232 electric level, connect the RS232 interface of PC, use PC software to control processor

RS232  Out

Serial communication looping out, RS232 electric level, use one PC to control all processors

 

3-4 Connection diagram

blob.png

 

3-5 Specifications




Input

Type/Quantity

1×Video
     2×VGA(RGBHV)
     1×DVI(VESA /CEA-861)
     1×HDMI(VESA /CEA-861)
     1×DP(VESA)
     1×SDI(SDI/HD-SDI/3G-SDI)

Video Standard

PAL/NTSC

Composite Video Amplitude/Impedance

1V(p_p)/ 75Ω

VGA Format

PC(VESA Standard)

≤1920×1200_60Hz

VGA Amplitude/Impedance

R、G、B = 0.7 V(p_p)/ 75Ω

DVI Format

PC(VESA Standard)

≤1920×1200_60Hz


HDMI1.3(CEA-861)


HDMI Format

PC(VESA Standard)

≤3840×2160_30Hz


HDMI1.4(CEA-861)


DP Format

Display Port 1.2(VESA Standard)

≤3840×2160_30Hz

 SDI Format

SMPTE259M-C
     SMPTE 292M
     SMPTE 274M/296M
     SMPTE 424M/425M

480i_60Hz
     576i_50Hz
     720p、1080i、1080p

Input Connectors

Video: 4-pin VGA
     VGA:15-pin D_Sub(Female)
     DVI:24+1 DVI_D
     SDI:BNC/ 75Ω
     HDMI: HDMI terminal A class
     DP:Display Port

Outputs


Type/Quantity

8×DVI

Preview Output

1×DVI(Any one of them can be selected for preview output)

DVI Resolution

1920×1080_60Hz

Output Connectors

DVI:24+1 DVI_D

Others


Control

RS232/USB/LAN

Input Voltage

100-240VAC  50/60Hz

Maximum Power Consumption

≤60W

Environment Temperature

0-45 ℃

Environment Humidity

15-85%

Dimension

483(L) x 300(W) x 89(H)mm

Weight

Gross weight:7.7Kg, Net weight:5.4Kg


 

3-6 Dimension

blob.png


Chapter4. Front panel

4-1 Button instruction

blob.png


1. Input Cards (In-B, In-D): stand for 2 input cards accordingly. In-B is Full HD Video Input Card. In-D is Ultra HD Video Input Card. When pressing a button to select a card,if the red light of the indicator is on,it means the operation of the current input card is valid.

 

2. Input Card SourcesSDI/DPDVI/In-BVGA/VGAVideo/HDMI):

Input card selection,when selecting an input signal, if the green light of the indicator is on. It means the signal is available.Otherwise the light will flicker. 

 

3. PIP: turn on or off the picture-in-picture function. If the indicator is on and flicker, it means signals should be selected.After selected one signal from “Input Card Sources”, it will be on green light. PIP signal can be same as or different from the main pic signal.

 

4. Output CardsOut-KOut-L: stand for 2 output cards accordingly,.When select one card and the indicator is on red light, it means the operation of the current output card is valid.

 

5. Display Channels (CH)CH1CH2CH3CH4):image output channel selection. The indicator is on green light all the time when one output channel is selected.Image output channel (CH), in the system of this device, is also interpreted as “image layer”. The device can maximally offer 4 image layers (CH1, CH2, CH3, CH4) which can be overlapped.

 

6. Knob: turn it to adjust the parameters on the menu.

 

7. OK:  press it to confirm the operation.

 

8. Brt+,Brt-versatile buttons, “↑” and “↓” are used to select an item under setting situation. While Brt+ and Brt- are used to adjust the brightness under operation situation.

 

9. blob.png :return to the previous menu.

 

10. Setup :enter the setup menu.

 

11.M1M2M3M+display mode select.

 

There are 16 display modes in total. Press M1, M2 or M3 to directly select display mode 1, 2 or 3 and the indicator light is on. Mode 4—16 can be selected by pressing M+ to enter mode invoking menu and rotating the knob.

 

Each display mode has display image status and its related parameters:Size and location of image layer (input image will be cropped, so the new size and location will be created and output).

 

12.Lockpress the button and the indicator is on red light, all the other buttons are locked. Press the button again for 3 times, all the other buttons are unlocked and the light is off.

 

13.Infodisplay the system information. We can press button to check different status and parameters of the device.

 

Chapter5. Introduction to functions

LVP608 can maximum support 2 Video Input Cards  (each card includes SDI/DP, DVI/In-B, VGA, Video/HDMI) and 2 Video Output Cards.

The output signal of In-B enters to the DVI input port of In-D, as the DVI input signal of In-D.

The signal In-D output divided into left half part (Left) and right half part (Right),enter Baseboard matrix, through Interaction and distribution of matrix, as the input signal of Video Output Card (In1,In2, In3, In4).

blob.png

 

The image output card design of LVP608 has 3 different output modes.In this device,the design currently has: four ports, two ports (up/down) and one port,customers can select output modes according to the project requirements.

5-1  Output port: four ports

blob.png

Four output ports are:

Out1 = CH1  Out2 = CH2  Out3 = CH3  Out4 = CH4

This means:

Output port1 (Out1) outputs image from image layer1 (CH1)

Output port2 (Out2) outputs image from image layer2 (CH2)

Output port3 (Out3) outputs image from image layer3 (CH3)

Output port4 (Out4) outputs image from image layer4 (CH4)

 

Image layers (CH1, CH2, CH3, CH4) correspond to input channel s(In1, In2, In3, In4).

Image layer (CH) can crop the image of input channel and output to 4 output ports separately.

Four ports can apply to LED screen of Width <=3840, Height <=2160 (2X2)

Four ports can apply to LED screen of Width <=7680, Height <=1080 (4X1)

 

If you only use 2 of the four ports, it can apply to LED screen of Width <=3840, Height <=1080 (2x1)

 

5-2  Output port: two ports (up/down) 

blob.png

Two output ports are:

Out1 = CH1 + CH2     Out2 = CH3 + CH4

        This means:

Out1 outputs the image generated by 2 image layers overlapped (CH1 and CH2);

        Out2 outputs the image generated by 2 image layers overlapped (CH3 and CH4);

Out3 and Out4 no output.

 

Image layers (CH1, CH2, CH3, CH4) correspond to input channel s(In1, In2, In3, In4).

Image layer (CH) crop the image of input channel and output to 2 output ports separately.

Two ports can apply to LED screen of Width <=1920, Height <=2160 (1x2)

 

5-3  Output port: one port

blob.png

Out1 = CH1 + CH2     Out2 = CH3 + CH4

        This means:

Out1 outputs the image generated by 2 image layers overlapped (CH1 and CH2);

        Out2 outputs the image generated by 2 image layers overlapped (CH3 and CH4);

Out3 and Out4 no output.

 

        Only connect Out 1 to Sending Card.

Image layers (CH1, CH2, CH3, CH4) correspond to input channels (In1, In2, In3, In4). 

Image layer (CH) cut out the image of input channel and output to 2 output ports separately. 

One port can apply to LED screen of Width <=1920, Height <=1080.

 

Chapter6. Basic operation introduction

 

When system starts, it will automatically detect and identify the number and location of input cards and output cards. The LCD panel will display the information accordingly. The introduction of basic operations is based on full configuration (2 PCS of input cards and 2 PCS of output cards) and the default menu will be as follows when system starts:

blob.png

6-1  Select input signals for input cards

Press SDI/DPDVI/In-BVGAVideo/HDMI to select a signal, and press “In-B or In-D” to select an input card for operation.

 

6-2  PIP setup for input cards

Press “PIP” and then select “SDI/DPDVI/In-BVGAVideo/HDMI”as the signal for PIP. Press “In-B, In-D” to select an input card for operation.

 

6-3  Display mode setup of output cards

There are 16 display modes intotal, press “M1,M2 or M3”to directly select display mode 1,2 or 3,and the indicator light is on; Mode 4-16 can be selected by pressing “M+” to enter mode invoking menu and rotating the knob. “OK” to confirm and “blob.png” to quit. The menu of “Display mode setup” is as follows:

Each display mode of LVP608 includes the status and relative    

parameter of displaying image:

The size and location of image layer (include: crop the size and location of input image, then output the size and location of the copped image)

blob.png

6-4  Output port setup

Press “Setup” to enter “user settings”, press “,”to select “Output Card Setup”, press “OK” to enter its sub menu. Press “,”to select “Advanced Setup”, press “OK” to enter its sub menu, press “,” to select “Output Port”, turn the knob to select “OK” to enter the confirmation sub menu.

Press Out-K, Out-L to select the output card.

blob.png

 

On the confirmation sub menu, press “OK” to change output port.

blob.png

Notice: to change the output port will restore the data of the output card,don’t change it if unnecessary.

 

6-5  Brightness setup

The adjusting range of brightness is 0-32, “0” stands for the lowest brightness, press “Brt+”to increase the brightness or “Brt-”to lower it.To make sure of the complete grey level of the output images,the default is set as “32”and we can turn the knob to select one or two output cards for brightness adjusting.

blob.png

 

6-6  Automatic VGA calibration

When the current input signal is VGA and it is valid,press “VGA” to enter the confirmation menu of VGA automatic calibration,press “VGA”one more time to confirm calibration and then blob.png  to quit the menu,The menu is as follows:

blob.png

 

6-7  Button lock

Press “Lock”,other buttons will be locked in case of wrong operation.On the menu of “Button Lock”,press “Lock” three times to quit the lock state.When buttons are locked,only LAN,RS232 and USD communication are available in case of the conflict between remote control and panel control.When commands are sent from remote,buttons will be automatically locked.

 

The menu is as follows:

blob.png

 

6-8  Check system information

Press “Info” to enter the menu of system information,and then press “,”to turn the page and “blob.png ” to quit.The menu is as follows:

blob.png

 

Chapter7. User settings

User settings are used for the overall system setup,these settings consist of 3 parts:input card,output card and the system.On the default menu,when system starts,press “Setup” to enter the menu of “User settings” and“,” to select settings,press “OK” to confirm,and “blob.png” to quit the menu.

Following is the detailed instruction of each setting:


7-1 Input card setup

Press “Setup” to enter the menu of “User settings”, “,”to select “Input Card Setup”, press “OK” to enter the sub menu. Press “In-B or In-D” to select an input card to change its settings.

blob.png

 

1.Set the size and location of main image

On the menu of “Input Card Setup”, press “,” to select “Main Setup”, and “OK” to enter the sub menu.

blob.png

Press “,” to select the setting, turn the knob to ajust and then press “OK” to confirm.

blob.png

 

2.Set the size and location of PIP

 

On the menu of “Input Card Setup”, press “,”to select “PIP Setup”, press “OK” to enter the sub menu.

blob.png

Press “,”to select the setting, turn the knob to ajust, and press “OK” to confirm.

blob.png

 

3.Set brightness, contrast and color

On the menu of “Input Card Setup”, press “,”to select “ Image Setup”, and “OK” to enter the sub menu.

blob.png

Press “,”to select the setting, turn the knob to ajust, and press “OK” to confirm.

blob.png

The ajusting range of brightness, contrast and color is 0-100.Brightness ajusting is only valid for the selected input card, if the ajusting is wrong, press “Reset” to return to the default.

 

Notice:to change the settings is not recommended,unless brightness ajusting through the panel buttons can’t meet customers’ requirements.


4. Set text on/off,text source and text mode

 

On the menu of “Input Card Setup”, press “,”to select “Text Setup”, press “OK” to enter the sub menu.

blob.png

Press “,”to select the setting, turn the Knob to ajust, press “OK” to confirm.

blob.png

 

5.Advanced setup

On the menu of “Input Card Setup”, press “,”to select “ Advanced Setup”, press “OK” to enter the sub menu.

blob.png 

 

 Set fade time

On the menu of “Input Card Advanced Setup”, press “,”to select “ Fade Time”, turn the knob to ajust, and press “OK” to confirm.

blob.png

 

● HDMI hot plug on/off

On the menu of “Input Card Advanced Setup”, press “,” to select “HDMI Hot Plug”, turn the knob to ajust, and press “OK” to confirm.

blob.png

Notice: when LVP608 is switching signal source, it will send a “hot plug signal” to HDMI device, so the device can update HDMI signal flow and working normally. In this situation,a small number of HDMI devices can’t working normally in extended desktop,then you can turn it off. Generally we don’t suggest you to turn it off.

 

 Set DP version

On the menu of “Input Card Advanced Setup”, press “,” to select “DP Version”, turn the knob to ajust, and press “OK” to confirm.

 

blob.png

Notice: only when input card is In-D,you can set DP version.

 

 Refresh data

On the menu of “Input Card Advanced Setup”, press “,” to select “Refresh Data”, and press “OK” to confirm.

blob.png

Notice: sometimes when users change input cards by themselves, the data of new input cards might be inconsistent with that of the system. “Refresh Data” will then update the system data to be consistent with that of the new input cards.Generally we don’t suggest customers to change it.

 

 Reset input card 

    On the menu of Input Card Advanced Setup”, press “, ” to select “Reset Data” and then press “OK” to enter the sub menu.

 

blob.png

When entering the sub menu of “Reset Data”, press OK to start to reset .

blob.png

Notice: sometimes when users change input cards by themselves, the data of new input cards might be inconsistent with that saved by the system. “Reset data” will restore the data of new input cards to the factory default.  The operation is only valid for a single input card, so it won’t affect the data of other input cards. 


7-2 Output card setup

 

Press Setup” to enter the menu of “User Settings”, “, ” to select “Output Card Setup” and then “OK” to enter the sub menu.

 

blob.png

 

1.Set the size and location of input image for output card

On the menu of “Output Card Setup”, press “↑,↓” to select “Input Image Setup” and “OK” to enter the sub menu. 

blob.png

Press “,” to select the setting, turn the knob to ajust, and press “OK” to confirm.

blob.png

 

2.Set the size and location of output image for output card

 

On the menu of “Output Card Setup”, press “↑,↓” to select “Output Image Setup”, press “OK” to enter the sub menu.

 

blob.png

Press “,” to select the setting,turn the Knob to ajust, and press “OK” to confirm.

blob.png

 

3.Output card matrix setup

On the menu of “Output Card Setup”, press “,” to select “Matrix Setup”, press “OK” to enter the sub menu.

 

blob.png

 

4.Clock setup

 

On the menu of “Output Card Setup”, press “,” to select “Clock Setup”, press “OK” to enter the sub menu.

 

blob.png

 

Press “,”to select the setting, turn the knob to ajust, press “OK” to confirm.

 

blob.png

Notice: clock setup is only used when display is out of sync,if display is out of sync,please set “Frame Sync” as In1,and also select “System Clock”as In1.

 

5.Advanced setup

On the menu of “Output Card Setup”, press “,” to select “Advanced Setup”, press “OK” to enter the sub menu. Press “Out-K” or “Out-L” on front panel to select the output card to set, press “CH1, CH2, CH3 or CH4” to select the channel to set.

 

blob.png

 

 Set output port of output card

On the menu of “Output Card Advanced Setup”, press “,” to select “Output port”,turn the knob to ajust, press “OK” to enter the sub menu.

blob.png

 

On the menu of “confirming output port”, press “OK” to change output port.

 

blob.png

Notice: change output port will cause the data reset, don’t change it if unnecessary.


●  Auto detect of signals for output card

On the menu of “Output Card Advanced Setup”, press “,to select “Auto Detect”, turn the knob to ajust,and press “OK” to confirm.

blob.png

Notice: normally “Auto detect” is off,it is mainly used for malfunction detec of input card. When “Auto Detect” is on and In-D has malfunction, the screen will be blank.

 

● Channel reset

On the menu of “Output Card Advanced Setup”, press “,” to select “CH Reset”, press “OK” to confirm.

 

blob.png

Notice: input signals for output cards will be briefly unstable when making changes in “Matrix K Setup” or “Matrix L Setup” and it will lead to blurred or blank screen. “CH Reset” will restore the system. Normally this operation is not necessary.

 

 Refresh data

On the menu of “Output Card Advanced Setup”, press “,”to select “Refresh Data”, press “OK” to confirm.

blob.png

Notice: sometimes when users change output cards by themselves, the data of new output cards might be inconsistent with that of the system. “Refresh Data” will then update the system data to be consistent with that of the new output cards.

 

 Reset data

On the menu of “Output Card Advanced Setup”, press “,” to select “Reset Data”, press “OK” to enter the sub menu.

blob.png

On the sub menu of “Reset Data”, press “OK” to reset.

blob.png

Notice: sometimes when users change output cards by themselves, the data of new output cards might be inconsistent with that saved by the system. “Reset data” will restore the data of new output cards to the factory default.  The operation is only valid for a single output card, so it won’t affect the data of other output cards. 


7-3 System setup

Press “Setup” on front panel to enter “user settings”, press “,”to select “System Setup”, press “OK” to enter the sub menu.

blob.png

1.IP address

On the menu of “System Setup”, press “,” to select “IP Setup”, press “OK” to enter the sub menu.

 

blob.png

Press “,” to select the setting, turn the knob to ajust, and press “OK” to confirm.

blob.png

 

2.Subnet mask address

On the menu of “System Setup”, press “,” to select “Mask Setup”, press “OK” to enter the sub menu.

blob.png

Press “,”to select the setting, turn the knob to ajust, press “OK” to confirm.

blob.png

 

3.Gateway address

On the menu of “System Setup”, press “,”to select “Gate Setup”, press “OK” to enter the sub menu.

blob.png

Press “,”to select the setting, turn the knob to ajust, press “OK” to confirm.

blob.png

 

4.MAC

On the menu of “System Setup”, press “,”to select “MAC Setup”, press “OK” to enter the sub menu.

blob.png

 

Press “,”to select the setting,turn the knob to ajust, press “OK” to confirm.

 

blob.png


5.Advanced setup

 

On the menu of “System Setup”, press “,”to select “Advanced Setup”, press “OK” to enter the sub menu.

blob.png

●  System language

On the menu of “System Advanced Setup”, press “,”to select “ 语言 Language”, turn the knob to ajust, press “OK” to confirm. You can select English or Chinese as system language.  

 

blob.png

●  Device ID

On the menu of “System Advanced Setup”, press “,” to select “ Device ID”, turn the knob to ajust, press “OK” to confirm.

blob.png

 

●  Reset data

On the menu of “System Advanced Setup”, press “,” to select “ Reset Data”, press “OK” to confirm.

blob.png

 

On the sub menu of “ Reset Data”, press “OK” to reset.

blob.png

Notice: “Reset Data” will restore all the system data to the factory default. Normally it is not suggested to use.

 

Chapter8. Copyright information

 

The copyright of this manual is owned by SHENZHEN VDWALL CO., LTD., unless with prior consent of VDWALL, nobody is permitted to copy or use any part or all of the information contained herein.

 

This manual is provided for reference only, VDWALL reserves right to change the product appearance, dimensions and specifications from time to time without notice to users.


Hot Tags: LVP608 video processor, China, manufacturers, suppliers, factory, customized, wholesale, price, pricelist, quotation, made in China
Related Products
Copyright © Nationtronics Group Co.,Ltd All Rights Reserved.