Search

You Are Here:Home > Product > Video Processor
LVP609 Video Processor

LVP609 Video Processor

LVP609 Real 4K pole-definition Video processor in LED industry LVP609 upgraded picture Key features: ◆4K2K_60Hz real 4K pole-clear LED video processor, advanced interlaced motion image adaptive processing technology, moving images without tailing and saw-tooth; ◆Within 4K2K range, the LED screen......

Send InquiryChat Now

LVP609 Real 4K pole-definition Video processor in LED industry

blob.png 

LVP609 upgraded picture

Key features:

◆4K2K_60Hz real 4K pole-clear LED video processor, advanced interlaced motion image adaptive processing technology, moving images without tailing and saw-tooth;

◆Within 4K2K range, the LED screen shows point-to-point synchronization display; supporting Promise zoom;the maximum load of one single machine is 16 million pixels, without cumbersome software settings;

◆Input: Ultra HD + HD + SD, analog + digital; HDMI2.0 (4K2K_60Hz) x 1, CVBS x 2, VGA x 1, DVI x 1, SDI / HD-SDI x 1;the seamless switch , fade in and out switch among them

◆Output: DVI digital full HD, up to 8 route, single-port resolution of 1920 x 1080_60Hz

◆ Synchronous monitoring, you can use the monitor to monitor the 1080P 4K2K_60Hz input screen;

◆A variety of pre-stored mode and a key call, mode calling use seamless or fade in and fade out switch

◆Convenient panel key operation or RS232 / USB / LAN control settings;

Key specifications 

Inputs

Quantity /Type

2×Video

1×VGA(VESA)

1×DVI(VESA)

1×HDMI 2.0((VESA/CEA-861)

1×SDI(SDI/HD-SDI/3G-SDI)

Video system

PAL/NTSC

Composite video amplitude Impedance

1V(p_p)/ 75Ω

VGA Format

PC(VESA)

≤1920×1200_60Hz

VGA amplitude Impedance

R、G、B = 0.7 V(p_p)/ 75Ω

DVI Format

PC(VESA)

≤1920×1200_60Hz

HDMI Format(HDCP2.0)

PC(VESA)

≤3840×2160_60Hz

HDMI2.0(CEA-861)

 

SDI Format

SMPTE259M-C

480i_60Hz

SMPTE 292M

576i_50Hz

SMPTE 274M/296M

720p、1080i、1080p

SMPTE 424M/425M

 

Input connectors

Video: BNC/ 75Ω

VGA:15pin D_Sub(Female)

DVI:24+1 DVI_D

HDMI:HDMI ATYPE

SDI:BNC/ 75Ω

Output

Quantity /Type

8×DVI

DVI Format

1920×1080_60Hz

Output connectors

DVI:24+1 DVI_D

Others

Control

RS232/USB/LAN

Input voltage

100-240VAC   50/60Hz

Overall power consumption

≤70W

Environment temperature

0-45℃

Environment humidity

15-85%

Product size

483(L) x 338(W) x94(H)mm

Carton size

540(L) x 400(W) x 180(H)mm

Net weight

5.95Kg

Gross weight

8.8Kg


LVP609 Series

4K 60Hz LED Video processor

User Manual

blob.pngblob.png

Chapter 1 Safety precautions

 

blob.png Danger !

There is high voltage in the processor, to prevent any unexpected hazard, unless you are a maintenance personnel, please do not open the cover of the device.

 

blob.png Warning !

1) This device shall not encounter water sprinkle or splash, please do not place anything containing water on this device.

2) To prevent fire, keep this device far from any fire source.

3)  If this device gives out any strange noise, smoke or smell, please immediately unplug the power cord from receptacle, and contact local dealer.

4) Please do not plug or unplug DVI signal cable if the device is powered on.

 

blob.png Caution !

1) Please thoroughly read this manual before using this device, and keep it safe.

2) In the event of lighting or when you are not going to use the device for a long time, please pull the power plug out of receptacle.

3) Nobody other than professional technicians can operate the device, unless they have been appropriately trained or under guidance of technicians.

4) To prevent equipment damage or electric shock, please don’t fill in anything in the vent of the device.

5) Do not place the device near any water source or anywhere damp.

6) Do not place the device near any radiator or anywhere under high temperature.

7) To prevent rupture or damage of power cords, please handle and keep them properly.

8) Please immediately unplug power cord and have the device repaired, when

1. Liquid splashes to the device.

2. The device is dropped down or cabinet is damaged.

3. Obvious malpractice is found or performance degrades.

 

Chapter 2 Packing list

 

Please unpack the product with care, and then check whether all the following items are included in the package. If anything is found missing, please contact the dealer.

Standard accessories

The accessories supplied with this product may differ from the following pictures, but they are applicable for the regions where you live (LED sending card is optional accessory)

blob.pngblob.png


Chapter 3 Hardware connection

3-1 Rear panel signal port picture 

blob.png


3-2 Port description

1. Video signal input

LVP609 supports 6 channels of video signal input as the table below:  

 

Ports

Description

V1、V2

2 channels of PAL/ NTSC system composite video input

VGA

1 channel of PC analog signal input

DVI

1 channel of DVI digital signal input ( compatible with HDMI1.3)

SDI

1 channel of SDI digital serial signal input ( compatible with HD-SDI/3G-SDI )

HDMI 2.0

1 channel of HDMI 2.0 digital signal input

  

2. Video signal output

 

LVP609 can assemble maximum 4 output cards, the serial number are K L M N. every output card can outputs 2 channels of DVI image signal, output port as the table below:


Ports

Description

Out1Out2

2 channels of DVI output port, used to connect LED sending card or monitor

 

3. Communication port

Ports

Description

LAN

Local area network TCP/IP network control port

USB

USB communication port

RS232 In

Serial port communication port, RS232 electrical level, connect the RS232 interface of computer, for using PC software control processor

RS232 Out

Serial port communication cascading output, RS232 electrical level, when through single PC control several processors to use

  

3-3 Hardware connection diagram

blob.png


3-4 Technical specification


Input signal index

Quantity / type

     2×CVBS
     1×VGA(RGBHV)
     1×DVI(VESA /CEA-861)
     1×SDI(HD-SDI/3G-SDI)
     1×HDMI 2.0(VESA /CEA-861)

Composite video system

PAL/NTSC

Composite Video Amplitude / Impendence

1V(p_p)/ 75Ω

VGA format

PC(VESA)

≤1920×1200_60Hz

VGA Amplitude / Impendence

R、G、B = 0.7 V(p_p)/ 75Ω

DVI format

PC(VESA)

≤1920×1200_60Hz

 

HDMI1.3(CEA-861)

≤1080p_60Hz

SDI format

     SMPTE259M-C 
     SMPTE 292M
     SMPTE 274M/296M
     SMPTE 424M/425M

     480i_60Hz
     576i_50Hz
     720p、1080i、1080p

HDMI 2.0
     (HDCP 2.2)

PC(VESA)

≤1920×1200_60Hz

 

HDMI2.0(CEA-861)

≤3840x2160_60Hz

Input port

     CVBS:BNC
     VGA:15pin D_Sub(female)
     DVI:24+1 DVI_D
     SDI:BNC/ 75Ω
     HDMI 2.0: HDMI A mode

Output signal index

 

Quantity / type

8×DVI

DVI format

1920×1080p_60Hz

Output port

DVI OUT:24+5 DVI_I

Other

 

Control port

RS232/USB/LAN

Input voltage

100-240VAC  50/60Hz

Overall power consumption

≤100W

Environment temperature

0-45 ℃

Environment humidity

15-85%

Dimension

483( Length ) x 300( Width ) x 89( Height )mm

Weight

G.W.:9Kg, N.W.:5Kg


3-5 Installation dimension 

blob.png


RS232 connection wires, wires order 

blob.png

Chapter 4 Frontal panel button description  

 

4-1 Frontal panel button sketch map

blob.png

1. Input signal source selection button

 

Input card signal source selection buttons, when select some signal source, the green indicator light on relative button lit up. If the input port inputted valid signal, the indicator lit up normally, or it will flicker.

V1V2VGADVISDIHDMI

 

Note: press VGA button continually processor will adjust VGA signal automatically.

 

2. Output card selection button

When select some output card, the red indicator light on relative button lit up, this moment you can do relative operation to the output card.

 

KLMN

 

3. Output card port selection button

 

Output card selection button, when select some output port, the green indicator light on relative button lit up normally, this moment you can do relative operation to the output image.

 

Out1Out2

 

4. Setup buttons

 

Setup button: set processor function parameters.

SetupKnob blob.png  

Setup:Press to enter setup menu

:Press to select upper or down setup option

Knob:Rotate Knob to adjust numerical value or select parameter

OK:Press Knob / OK button, to save parameter

 blob.png:Used for return to last menu


5. Information display 

Information display (Info), when device is working and operation status, press (Info button) the LCD of processor displays current setup and information. Press  or   can check the last or next option, press blob.png button to exit  the interface.

 

6. Display mode buttonsM1M2M3M4):

Press display mode button to call the display mode, meantime the indicator light on the button lit up normally.

Every set of display mode in the device include the input and output parameter of output image.

 

7. Lock button 

Lock button (Lock), buttons lock function button, when lock is open the red indicator light on the button lit up, except Lock , another buttons are not available, press Lock button three times continually to unlock, the red indicator light on the button is closed.

 

Chapter 5 User basic operation instruction

After system power on, LVP609 will detect the quantity, location and configuration information of card automatically, different configuration, the display interface on LCD is different, the relative instruction below is under full configuration (4 output cards) and system start under default menu.

blob.png

5-1 Input signal selection

In user operation interface, the operation content of input card includes input signal selection, signal switch time setup and VGA input automatic adjustment.

1. Input signal selection

Press input signal source button(V1V2VGADVISDIHDMI),when select some signal source, the green indicator light on relative button lit up. If the input signal to the input port is valid, the indicator light lit up normally; or the indicator light flicker.   


2. Signal switching time setup

Switching between input signal, can set 0s seamless switching or 1s, 2s, 3s fade in fade out switching, you can configure these parameter in user menu, press Setup button to enter user setup menu select 1.Input Card Setup—2.Advanced Setup—1.Fade Time to enter the configuration menu.

blob.png

 Picture 5-1a LCD interface: Fade in fade out time setup

  

3. VGA input signal automatic adjustment

When input card signal source is valid VGA input, press VGA button to enter VGA automatic adjustment menu, press VGA button again to adjust VGA automatically, press blob.png button to exit menu.  

blob.png

 Picture 5-1b LCD interface:VGA automatic adjustment confirmation menu

 

5-2 Output card operation

In user operation interface, the operation content of output card includes check output port information and display mode setup.

 

1. Check output port parameter

Firstly press output card button(KLMN) to select output card, then press output port button (Out1Out 2)to select output port, this moment the LCD on front panel displays the input and output parameters of current port.    


2. Output card display mode setup

Display mode from 1 to 4, total 4 sets, press M1M2M3 and M4 to call, meantime the indicator light on the button lit up. Press Setup button to enter user setup menu select 2.Output Card Setup to set input and output parameter, and to set display effect of corresponding display mode.  


5-3 Another function operation 

Except the relative operation of input and output card, also have button lock, check system information relative operation etc.

 

1. Button lock

To prevent mistake operation press Lock button to open lock, another buttons will be lock. When buttons under lock status, to prevent conflict between remote operation and button operation only LAN, RS232 and USB communication are available.

When button is lock status, press Lock button 3 times continually to exit.

 

blob.png

 Picture 5-3a LCD interface:Button lock

 

2. Check system informationInfo 

Press Info button to enter system information menu, press , button to check, press blob.png button to exit, system information menu as below:

blob.png

 Picture 5-3b LCD interface: System information

blob.png

 Picture 5-3c LCD interface: System information

blob.png

 Picture 5-3d LCD interface: System information

 

blob.png

Picture 5-3e LCD interface: System information

 

Chapter 6 User setup menu instruction

 

User setup menu is about whole processor setup, total divide to be 3 modules, respectively are input card setup, output card setup, system setup.  

 

blob.png

          Picture 6 LCD interface:Setup

 

After system start, press Setup button to enter user setup menu, under the menu through press , button to select relative setup menu option, press knob button (OK button) to enter, press  blob.png button to return to last menu. The particular function introduction about every menu as below:

 

6-1 Input card setup

 

After system starting up, press Setup button to enter user setup menu, in the menu through press , button to select Input Card Setup, press knob (OK button) to enter the setup menu as below. In the menu can configure input card parameters.  

blob.png

Picture 6-1a LCD interface:Input card setup

 

1. Image quality

 

1. Image quality menu is used to set the brightness, contrast and color. Press , button to select relative setup menu option, rotate knob to change current parameter, press knob (OK button) to save parameter, 4 Reset option is used to reset the parameter of the 3 option above.  

blob.png

Picture 6-1b LCD interface:Image quality setup

 

2. Input card advanced setup

blob.png

Picture 6-1c LCD interface:Input card advanced setup

 

Input card advanced setup menu include Fade in fade out time, DVI hot plug, HDMI EDID color, Resume data and Reset data options, the particular function as the table below.

Menu

Function description

1. Fade Time

set fade in fade out switching time between input signal

 

2.DVI Hot plug

DVI input port hot plug signal switch setup, it is applied for minority PC system, to prevent the problem when switch DVI signal cause the playing video changed to be desktop background.  

3.HDMI EDID

color

Set HDMI EDID data as YCbCr422 or RGB format to adapt some 4K signal source, which discern incompatible EDID data appearing color mistake problem  

4.Resume data

Recover system data to input card, normally after replacing new input card we need to recover the system data

5.Reset data

It is used to delete the user data in input card, to recover the data be default value, cautious to use!

 

Setup method: press , button to select relative setup option, the frontal three options according to the reminder of menu press OK button, then after appearing  confirmation menu press OK button continually. 


6-2 Output card setup

 

After system starting up, press Setup button to enter user setup menu, in the menu through press , button to select 2.Output Card Setup, press Knob (OK button) to enter the menu as below. In the menu can set output card parameter.  

blob.png

Picture 6-2a LCD interface:Output card setup

 

1.Output image setup

blob.png

Picture 6-2b LCD interface:Output image setup


Setup menu of output image used to set the input and output parameter of output image. In the menu press display mode button(for example M1M2) to select current display mode, press output card button(K L M N) to select output card, press , button to select relative menu option, rotate knob to change current parameter, press knob (OK button) to save parameter.  

 

2. LED setup

blob.png

Picture 6-2c LCD interface:Input image setup

 

LED setup menu used to import LED splicing screen parameter for quick splicing. The operation method of quick splicing as below:

1. In 1-2 option import the total width and height of the LED needed to splice;

2. In 3-6 option import the LED screen actual size and location which the output port drives;

3. In 7.Auto calculation option press OK button, then the current parameters in input image setup and input image setup menu update as automatic calculation parameter, meantime the right side of every setup option displays calculated reference value.  


3. Advanced setup

blob.png

Picture 6-2d LCD interface:Output card advanced setup

 

1.Data Resume and 2.Reset Data two setup options, the particular function instruction as the table below.

Menu

Function instruction

1.Resume Data

Recover system data to the output card, generally after replacing new output card we need to do this.

2. Reset Data

It is used to delete user setup of output card, recover the parameter of current output resolution and application mode to be default status, careful to use!

 

Setup method: Press output card button(KLMN)to select output card, press , button to select relative setup menu option, press OK button, then in the reminder menu of data will reset, press OK button again.

 

6-3 System setup

After system starting up, press Setup to enter user setup menu, in the menu trough press , button to select 3.system setup, press OK button to enter the menu as below. In the menu can set communication parameter and output resolution and application mode of LVP609.

blob.png

Picture 6-3a LCD interface:System setup


 1. Communication setup

blob.png

Picture 6-3b LCD interface:IP setup

 

blob.png

Picture 6-3c LCD interface:MASK Setup

blob.png

Picture 6-3d LCD interface:GATE Setup

 

blob.png

Picture 6-3e LCD interface:MAC Setup

 

1-4 option are communication parameter setup menu used to set the communication parameter of LAN port of LVP609. In relative communication parameter setup menu, press  button to enter setup option needed to adjust, rotate knob to select parameter, press OK button to save, when press  button to exit communication setup, the LCD screen of LVP609 reminder “  IP,MASK,GATE,MAC Change. Please Restart System”, according to reminder please restart LVP609.

 

2. System advanced setup

blob.png

Picture 6-3f LCD interface: System advanced setup

 

1). Language setup

语言 Language menu used to set the system language of LVP609. Press , button to select system language menu, rotate Knob to select Chinese or English, press OK button to save.  

 

2). Device serial number setup

Device ID menu used to number the serial number of device, when several LVP609 cascade together then use one PC to control them. Setup method:

Press , button to select 2.Device ID menu, rotate Knob to modify the serial number, press OK button to save.  

 

3). Reset data 

Reset date menu used to reset all date of system, recovery it to be default value. Setup method:

Press , button to select 3.Reset Data menu, press OK button, the will be a reminder on LCD “Data will reset”, press OK button again to reset.  

Note: modify application


Chapter 7 Mode instruction

 

LVP609 serials adopt insert card design method, the quantity of output card depend on requirement to custom-make. The specific mode description as below:  

blob.png


Hot Tags: LVP609 video processor, China, manufacturers, suppliers, factory, customized, wholesale, price, pricelist, quotation, made in China
Related Products
Copyright © Nationtronics Group Co.,Ltd All Rights Reserved.