Search

You Are Here:Home > Product > Video Processor

LVP86xx Video Processor

LVP86xx Multi-Windows Sync Processor Key features 1. Latest generation broadcast-grade video processing technology, integrating videowall processor, mixed video matrix switcher, multi-picture processor and video synchronous processor. 2. Inputs: analog + digital, SD + HD, totally 28 inputs......

Send InquiryChat Now

LVP86xx Multi-Windows Sync Processor

blob.png


Key features 

1. Latest generation broadcast-grade video processing technology, integrating videowall processor, mixed video matrix switcher, multi-picture processor and video synchronous processor. 

2. Inputs: analog + digital, SD + HD, totally 28 inputs including CVBS x 7、VGA x 7、DVI / HDMI x 7、SDI / HD-SDI x 7 .

3. Outputs:16 DVI Full High-Definition digital outputs, each with maximum resolution 1920 x 1080p. 

4. Synchronous mosaic technology: synchronous processing of ultra high-definition video played on multiple screens or network. 

5. Supports zoom mosaic or point-to-point mosaic,single unit can maximally support horizontal 30720 pixels or vertical 19200 pixels. 

6. 10-picture preview output via one DVI output. 

7. 4K2K Ultra high-definition dynamic background picture. 

8. Display of four pictures on single display, background picture plus three roaming pictures. 

9. Seamless switching and fade-in / fade-out between any two input signals. 

10. Multiple pre-saved models, seamless switching and fade-in / fade-out between them. 

11. AIAO( Any In Any Out ) function allows for displaying any captured picture in any specific area on screen. 

12. Card plug-in and redundant power supply designs bring more flexible and reliable operation. 

13. Easy control by panel / RS232 / USB.


Key specifications

blob.pngblob.png


LVP86XX 

LED Display Multi-window Sync Processor 

User Manual


blob.png

blob.png

I. Safety Precautions


Danger! 

There is high voltage in the processor, to prevent any unexpected hazard, unless you are a maintenance personnel, please do not open the cover of the device.

 

Warning!

a) This device shall not encounter water sprinkle or splash, please do not place anything containing water on this device.

b) To prevent fire, keep this device far from any fire source. 

c) If this device gives out any strange noise, smoke or smell, please immediately unplug the power cord from receptacle, and contact local dealer.

d) Please do not plug or unplug DVI signal cable if the device is powered on.

 

Caution! 

a) Please thoroughly read this manual before using this device, and keep it well for future reference.

b) In the event of lighting or when you are not going to use the device for a long time, please pull the power plug out of receptacle. 

c) Nobody other than professional technicians can operate the device, unless they have been appropriately trained or under guidance of technicians. 

d) To prevent equipment damage or electric shock, please don’t fill in anything in the vent of the device. 

e) Do not place the device near any water source or anywhere damp. 

f) Do not place the device near any radiator or anywhere under high temperature. 

g) To prevent rupture or damage of power cords, please handle and keep them properly. 

h) Please immediately unplug power cord and have the device repaired, when

 

i. Liquid splashes to the device. 

ii. The device is dropped down or cabinet is damaged.

iii. Obvious malpractice is found or performance degrades.

 

II. Items list

Please unpack the product with care, and then check whether all the following items are included in the package. If anything is found missing, please contact the dealer.

 

Standard accessories

The accessories supplied with this product may differ from the following pictures, but they are applicable for the regions where you live. (Sending cards are optional)


blob.png


Optional Accessories

Power Module(1 piece is standard-equipped and an extra one can be ordered for backup)

blob.png


III. Hardware Connection

1. System Framework

Due to the plug-in design of input and output cards, their required numbers will depend on customer-specific requirement. Single or dual DVI straight-through cards can only be installed in the slots for input cards.

blob.png


2. Rear View

blob.png

①Input Card slots ②Output card slots ③AC power jack ④USB/RS232 communication interface


3. Port Description

blob.png

blob.png

blob.png

4. Hardware Connection

blob.png


5. Specifications

blob.pngblob.png


IV. Instructions of LVP86XX Control Software

The software is used to control LVP86XX Multi-Window Sync Processor. By it we can realize following functions:

1. Communication Mode

2. Software Interface

1) Special Instruction 

2) Main Interface 

3. Resolution Settings

4. Communication Mode 

5. Device Initialization 

6. Brightness, contrast, hue, sharpness, threshold value 

7. Language Settings 

8. Version Information 

9. Input Card

10. Matrix Board

11. Output Card 

12. Cross-screen Mosaic through Multi Cards

13. Mode

1) Input card 

2) Matrix board

3) Output card 

4) Mosaic through multi cards (only in configuration mode 6) 

5) Overall mode invoking 

14. Blending Configuration

1.Communication Mode

LVP86XX can be controlled by the software through RS232 or USB port.

In this way, firstly connect the communication serial port of PC (COM) or USB to LVP86XX and then run the program: LVP86XX Control Software.exe 

2. Software Interface

1) Special Instruction

Several points need to be specially noted about the software:


● LVP86XX has 16 configuration modes and modes of input cards, output cards and matrix board are all different. 

● A hidden menu acquired by right-click is specially designed for output cards. 

● 7 input cards are available at most (A, B, C, D, E, F, G): A and B support 2 straight-through DVI inputs and others only support single 

straight-through DVI input. 

● Output cards (K, L, M, N): each card has 4 outputs and each output can choose any one of 4 inputs as its input source.

 

●  blob.png, fine adjustment can be found by right-click in all the options of sizing. Select the option and the window will show up.

 

2) User Interface

● Double-click to initialize blob.png, the user interface will show up. As shown by the following picture, each part is marked:

blob.png


3.  Resolution

blob.png

1.Current resolution.

When select another resolution, a confirm message will pop up.

blob.png 

Select “ blob.png”, all the resolutions of input cards and output cards will be changed. A detailed illustration will be given based on resolution 1920x1080@60Hz in the following.


4.  Communication

blob.png

5.Initialization

blob.png

6.Brightness/Contrast/Hue/Sharpness/Threshold

blob.png

7. Language

blob.png


8.Version

blob.png

9.  Input Card

blob.png

blob.png

blob.png

10. Matrix Board


● Only 1 piece of matrix board is available for matrix switching between inputs and outputs. 

● Matrix board has also 16 modes.

● Only existing input signals are available and selectable for outputs. 

● Non-existing output cards and corresponding outputs are forbidden to use. 

● Input signals are selectable, but only when PIP is turned on then PIP signals are available. 

● No signals from straight-through cards can be chosen, both of two DVI signals can be an option for matrix. 

● Loop signals are from output port 1 of card M and N, but input signals from card M and N can’t be selected as loop signals. 

● Click blob.png, to configure the matrix state of all current output cards into the device.

● If the matrix state is not as needed, click blob.png.

blob.png 


11. Output Card

 blob.pngblob.pngblob.pngblob.pngblob.png

1. 

1. Allocate an input channel to the corresponding input port. 

2. Settings of input channels of an output card. 

3. Parameters of the current input channel. 

4. Channel selection. 

5. Settings of 4 output ports of an output card. 

6. Parameters of the current output port.


● Drag any window or zoom in and out, the corresponding parameters will show up, press“ ” to send the parameters to the device.

● Right lick the window area and the menu will show up.

● Right lick input setup and the following menu will show up. Fast mosaic is limited to configuration mode 4 and 7 and fine adjustment is used for sizing of current input channel.

blob.png

● Fast mosaic is specially designed based on regular LED screens. Only one input card’s settings can be configured each time. Operation procedure is in sequence shown on the above figure:

blob.png

blob.png

“Channel Settings”: the device’s minimal value available is 0, so when the width or height is 0, it means that the represented module can’t be displayed and the size settings can only be performed by opening the fine adjustment window through the menu:

blob.png

1. Switch on/off output channels. When an output channel is switched off, no pictures will be output from it but only appears blue. 

2. Select input channel. If the same input channel is selected for 4 output channel, this normally will be for mosaic. 

3. Return to the current state of the output card. 

4. Save settings of the current output card.

For example, when we need to have the “4-in and 4-out” effect:

 

blob.pngblob.png

blob.pngblob.png

blob.png

Remark: All pictures will be output from channel 1. No pictures will be output from channel 2, 3, 4 and screen will be blank. Overlap relation of windows and layer changing time can be adjusted randomly.

 

Configuration Mode 7 

Take configuration mode 4 as reference


12. Multi-card Mosaic Mode (only in configuration mode 6)

blob.pngblob.png


1. Modes. 

2. Channel selection: the selected one will be put on the top layer.

 

 Multi-card mosaic is performed based on CH1 as the background picture. 

 CH2, CH3 and CH4 can be used for mosaic: the calculation is based on the current resolution. 

 As shown in above figure, CH2, CH3 and CH4 can be dragged randomly, press “save” to update the state to the device.

 Right lick output setup and the following menu will pop up:

blob.pngblob.png

blob.pngblob.png

 

13. Usage Mode 

● 16 usage modes can be saved for each of input card, output card and matrix board. 

● During using the device, the mode of using each input card, output card or matrix board is one of the 16 modes.

● The usage mode of each of input card, output card or matrix board can be invoked separately or together (for example: input card A in mode 1 and card B in mode 2; output card K in mode 3 and card L in mode 4; matrix board in mode 2).

The following figures are used to show the usage modes of input card, output card and matrix board:


a) Input Card

blob.pngblob.png

blob.pngblob.png

b) Matrix Board

blob.pngblob.pngblob.pngblob.png

blob.pngblob.pngblob.png

blob.png

blob.png

blob.png

blob.png

blob.pngblob.png

● If the current card is not in configuration mode 4, then the setup is not available.

● The fixed width of the blending area is 128. 

● To use CH1 and CH2 for horizontal blending: 

CH1: the value of horizontal right starting point is the width of the screen 

CH2: the value of horizontal left starting point is 0

● To use CH1 and CH2 for vertical blending:

CH1: the value of downward starting point is the width of the screen 

CH2: the value of upward starting point is 0 

Remark: fine adjustment is necessary sometimes for setting the starting point depending on the actual application.


V. Model Description

LVP86 X X

(1) (2) 

(1) Stands for the number of input card: 7 pieces at most 

(2) Stands for the number of output card: 4 pieces at most

 

LVP86XX is a customized product, the required number of input cards and output cards will be determined by the specific requirements of customers. For example, LVP8662 means that it is equipped with 6 pieces of input cards and 2 pieces of output cards.

 

VI. Copyright Info

The copyright of this manual is owned by SHENZHEN VDWALL CO., LTD., unless with prior consent of VDWALL, nobody is permitted to copy or use any part or all of the information contained herein.

 

This manual is provided for reference only, VDWALL reserves right to change the product appearance, dimensions and specifications from time to time without notice to users.

Hot Tags: LVP86xx video processor, China, manufacturers, suppliers, factory, customized, wholesale, price, pricelist, quotation, made in China
Related Products
Copyright © Nationtronics Group Co.,Ltd All Rights Reserved.